Guider IIS series User Guide | www.flashforge.com
the printing temperature of filament. For PLA filament, the extruder
temperature should reach 200
℃
, after reaching the extruder temperature,
click the [Forward]/[Reverse] rotation button to control filament load and
filament unload. Furthermore, if you want to stop filament load and unload,
you can click [Stop].
●
Temperature Control: Input the temperature you want to get in the left
frame, click [Apply], the printer will automatically heat the corresponding part,
the right side shows the current actual temperature of corresponding part.
After starting heating, the below curve of temperature form will start to change,
different color correspond different parts
’
temperatures
②
Update Firmware
NOTE
！
Please update firmware under instructions of Flashforge engineer,
Do not recommend updating on your own.
Every time when you start FlashPrint, it will automatically detect and download
the up-to-date firmware. If any update is available, a dialog box will pop up for
reminding the users to update.
Step 1: Click [Tools]--[Update firmware]. It needs to cut off connection
before updating firmware. If software and printer are already in connection, it
reminds you cutting off the connection, and then choose [Yes] and go on to
the next step.
Step 2: Choose corresponding printer type and firmware version and click
[OK] in the firmware updating box. After confirming the printer is in free state,
the software will automatically update the firmware