background image

N61e V1.0 or Higher               

 

  

3/23 

 

PRECAUTIONS                            

N61e is simple to use, but the safe operation requires some knowledge of 
batteries and chargers. Mishandling batteries or chargers can be dangerous, 
as it involves a risk of the batteries exploding and catching fire or charger’s 
permanent damage. Be sure to read these entire Instructions carefully before 
you use N61e for the first time. 

z

 

Don’t

 leave the charger unattended while in use.

 

 

z

 

Don’t

 place the charger or battery on a flammable surface or near a 

flammable object while in use.   

z

 

Don’t

 attempt to charge or discharge batteries in incompatible types or 

current.

 

 

z

 

Don’t

 overcharge or over discharge batteries as permanent damage 

could result. 

z

 

Don’t 

attempt to charge or discharge a battery if it is hot. 

z

 

Don’t

 attempt to balance a batteriy while the charge output is 

connected to another battery. 

z

 

Don’t

 touch the rear aluminium radiator extrusion as the high power 

operation can cause it to overheat. 

z

 

Don’t

 allow water, moisture or foreign objects into the charger. 

z

 

Don’t

 block the air intake holes or fan which could cause the charger 

to overheat and cause permanent damage. 

z

 

Don’t

 attempt to short-circuit the output as permanent damage could 

result. 

z

 

Don’t

 leave the charger connected to a power source or batteries when 

not in use.   

z

 

Keep out of the reach of children. 

z

 

It is 

STRONGLY RECOMMENDED

 to use the temperature 

detection sensor when    charging.

Summary of Contents for N61e
























Reviews: