N61e V1.0 or Higher
11/23
icon ‘b’ indicates which cells are being balanced.
BALANCER
pter
Figure 2
After powering on the N61e, no matter
whether a battery has been connected to the
output, the balancer will auto run at once as
soon as it had been connected as Figure2.
The voltage of each cell can be shown on any Li-Battery memory. The unit is
mV. And b, a tiny logo, indicates the cell in balancing. The balancer only
works on the cell which has a voltage higher than 3.3V. The max balancing
current is 100mA. Voltage resolution will be less than 10mV per cell.
It’s strongly recommend to charge a pack at a low current while balancing if
the voltage difference is larger than 100mV.
HANDLING INSTRUCTION FOR NiCd &NiMH Battery
NiCd & NiMH Battery Summary
Nominal voltage: 1.2V/cell
Min discharge cut off voltage:0.9V/cell.(3
～
6S:1.0V,12
～
18S:1.2V)
Recommended charge current:0.02
～
2C
Bal
a
nce Adapter
Figure 2
Balance Port
→
N61e
Page.6(Par11)
4000 3995 3990
0 0 0
b
Summary of Contents for N61e
Page 23: ...N61e V1 0 or Higher 21 23 ...
