www.flash-butrym.pl
2
1
INTRODUCTION
Thank you for purchasing LED PAR 64 SLIM 7x10W RGBW. For safety reasons and to ensure the trouble-
free operation, carefully read the instructions.
2
SAFETY INFORMATION
1.
Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2.
Disconnect the power supply before installation.
3.
Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4.
Do not use the device in high humidity conditions and at temperatures above 40° C
5.
The device must be installed on stable structures
3
PRODUCT INFORMATION
The device is equipped with high-quality, bright LEDs, while maintaining a small electric power
consumption, low operating temperature and long life. Unique design, high quality and high durability
make this device a great tool for both power users and those, who value simplicity and reliability.
The ergonomic handle (included) facilitates the use of the device in any condition. In order to expand the
range of mounting options, the holder has an additional mounting holes.
The electronics is made of high quality components and offers several features such as:
3.1
Features
Full DMX signal regeneration
Electronic protection against overheating
THEATRE or DISCO cooling volume modes.
Permanent color correction
Native support for optional wireless DMX module
3.2
Specification
Power supply voltage: 100 - 245V
Voltage frequency: 50/60Hz
Diode type: 4in1
Number of diodes: 7
Diode power: 10W
Beam angle: 25°
Display: LCD Matrix
Color: RGBW
Dimming: Linear: 0 - 100%
Number of DMX channels: 6 / 8
DMX standard: DMX 512
Control interface: 4 buttons
Operating modes: DMX512, Auto, Sound-controlled, Manual color, Master, Slave
Features: DMX Signal regeneration, Electronic protection against overheating
AC IN: powerCON
