Flash professional PS0710, User Manual

Page: 6 / 12

LED PAR 64 SLIM 7x10W RGBW PS0710
www.flash-butrym.pl
5
Set DMX Channel Mode
Channels
(8)
→ edit ENTER → change mode UP/DOWN
exit MENU/WAIT 5 SEC save and exit ENTER
cancel MENU/WAIT 5 SEC
Device reaction after
DMX signal disconnection
DMX Off
(BLACK, COLOR, DEMO,
SOUND) → edit ENTER → change mode UP/DOWN
exit MENU/WAIT 5 SEC save and exit ENTER
cancel MENU
Reset device Reset → reset device ENTER
Set fan noise level
Fan Mode
(DISCO, THEATRE)
→ edit ENTER → change mode UP/DOWN
exit MENU/WAIT 5 SEC save and exit
ENTER/MENU/
WAIT 5 SEC
Set master or slave mode
Mode
(MASTER, SLAVE)
→ edit ENTER → change mode UP/DOWN
exit MENU/WAIT 5 SEC save and exit
ENTER/MENU/
WAIT 5 SEC
Check device lifetime and
actual temperature Lifetime
(LIFETIME, TEMPERATURE)
→
check
temperature/
lifetime
ENTER
exit MENU/WAIT 5 SEC
Adjust permanent color
correction Color correction
(RED, GREEN, BLUE, WHITE)
→ edit settings ENTER → change value UP/DOWN
exit MENU/WAIT 5 SEC
save and go to
next param.
ENTER
cancel current
param. edit/back
MENU/WAIT 5 SEC
To achieve the desired effect after making changes in Manual settings, Demo or Sound mode, you should:
1. Disconnect DMX signal
2. Set the appropriate device response in Menu -> DMX off
3. Set and save the parameters in the selected mode (Manual settings, Demo, Sound)
4. Wait about 1s in order to the device detected the DMX signal status