CC
x 8
screw M5x10
HH
x 8
Screw 3/16”
.................................................................................................................................................
3
HH
CC
D
3. Insert upper support (D) to lower support
(L) using 8pcs screw M5x10.
Attach top plate assembly (B) to upper
support (D) using 8pcs screw 3/16”.
Hardware Used
Hardware Used
4
4. Attach the reflector (A) onto the top
plate assembly (B).
Screw the 3pcs stud (DD) on the top plate
assembly (B), put 3pcs flat washer (FF)
onto the top of stud (DD), then put the
reflector on the the stud (DD), secure them
with 3pcs flat washer (FF) and 3pcs wing
nut (EE).
EE
FF
FF
DD
x 3
x 3
x 6
EE
Wing nut
Stud
DD
FF
Flat washer
Top Plate Assembly (B)
Reflector (A)
