background image

www.flash-butrym.pl 

Page 2 

 

 

For  reasons  of  safety  and  approval  (CE)  the  personal  reconstruction  and/  or 

modification  of  this  product  is  prohibited.  Please  observe  that  damage  caused  by 
modifications performed manually to this device is not covered by the warranty. 

This product leaves our works in a perfect condition. Please observe all notes in these 

operating instructions to warrant this condition and the safe operation of the product! 

Any damage caused as a result of the non-compliance with these operating instructions 

leads to the expiration of any warranty claim. The manufacturer does not accept liability for 
any  damage  to  property  or  for  personal  injury  resulting  from  the  improper  handling  of  the 
product, or non-observance of the operating instructions. 

Store these operating instructions in a safe place for later reference and pass them to 

any new holder when selling or lending or leaving this device in the hands of any other party. 
 

Application According to Purpose 
 

 

 

This product is a lighting effect which creates special light effects with one lamp. To 

generate  these  effects,  the  product  must be  connected to  mains  and a  DMX-512 compatible 
controller. 
 
 

This  product  is  designed  for  230V,  50Hz  A/C  operation  and  exclusively  for  indoor 

use. 
 

If used for any purpose other than described in these operating instructions, the device 

may suffer damage and the warranty expires. Also, any other use is linked with risks such as 
short circuits, fire, electrical shock, etc. 
 

Notes on Safety 

 
1. Before Operation 
 
Prior to the initial operation of this product, please do the followings: 

 

Read these operating instructions with great care; 

 

Study and observe all instructions carefully; 

 

Ensure  that  everybody  and  anybody  involved  in  the  installation,  operation,  transport 
and storage of this product is suitably qualified; 

 

Verify  whether  any  visible  damage  was  caused  during  transport.  If  the  power  cord, 
housing or the light are damaged, do not operate the device; contact your specialized 
dealer immediately. 

 
2. Supply Voltage, Mains Cord and Connection to Mains 
 

The  handling  of  supply  voltage,  mains  cords  and  connections  to  mains  calls  for 

particular care considering the risk from a life-threatening electric shock, the risk of fire and 
the risk of short circuits! Please observe the following notes in particular. 
 

Products  operating  on  supply  voltage  should  be  kept  out  of  the  reach  of  children. 

Therefore  ensure  the  permanent  supervision  if  children  are  in  the  immediate  vicinity  of  the 
product! 

For  commercial  facilities  the  regulations  on  the  prevention  of  accidents  of  the 

respective  trade  association    must  be  observed.  The  operation  of  this  equipment  at  schools, 
training  facilities,  and  hobby  or  self-help  workshops  must  be  supervised  responsibly  by 
trained personnel. 

Summary of Contents for FL-300








Reviews: