LED MOVING HEAD 150W SPOT
•
Art No F7100501
Light Source: Ultra bright 150W LED
PAN range: ? 0
TILT range: ? 0
Color wheel: 8 main open with
the rainbow
Effects: 2 Gobos wheels: Fixed gobo
wheel and rotating Gobo wheel. 7 Gobos
+ White with Bi-directional rotate effect,
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit’s
5.1 Connecting DMX signal
The connection is performed using cable
with XLR-female -> XLR-Male plugs.
4. INSTALLATION
5. CONNECTION
3. PRODUCT INFORMATION
2 facet prism rotating, Frost filter. Gobo
Indexing function. Adjustable flash
frequency.
16 and DMX channel mode.
3-Pin XLR DMX input/output
Power supply: 110 - 240V AC, 50-60Hz
Power consumption: 200 W
Net Weight: 12,4kg
Dimensions: H(50 )xW(40)xD(33) cm
Dim. (case): H(66/54/ )xW(90)xD(57,5) cm
Weight (case): 78,2 kg
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit
when installing the fixture. The equipment
must be fixed by professionals. And it must
be fixed at a place where is out of the touch
of people and has no one pass by or under
it.
The device is equipped with the following
interfaces:
1. DMX (in/out): XLR 3-pin socket
2. Power (in/out): powerCON socket
1
3
2
2
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
CAUTION!
At the last fixture, the
DMX signal has to be terminated with a
terminator. Solder a 120Ω resistor between
signal (-) and signal (+) into a XLR plug and
plug it in the DMX output of the last fixture.
DMX
Controller
DMX 512
DMX 512
