Flash butrym F7000496, User Manual

Page: 3 / 10

www.flash-butrym.pl
2
1 INTRODUCTION
Thank you for purchasing LED MOVING HEAD BEAM 10W RGBW. For safety reasons and to ensure the
trouble-free operation, carefully read the instructions.
2 SAFETY INFORMATION
1. Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
3 PRODUCT INFORMATION
3.1 Specification

Power consumption: 10W

Power supply voltage: 100 - 240V

Voltage frequency: 50/60Hz

Diode type: 4in1

Number of diodes: 1

Diode power: 10W

Display: LED - 4 characters

Color: RGBW

Beam angle (min): 2°

Beam angle (max): 2°

Dimming: Linear: 0 - 100%

Flash frequency (min): 1Hz

Flash frequency (max): 18Hz

PAN range: 540°

TILT range: 270°

Number of DMX channels: 6 / 11

DMX standard: DMX 512

Control interface: 4 buttons

Operating modes: DMX, Automatic, Sound controlled

AC IN: integrated power cord

DMX IN: XLR - 3 pin

DMX OUT: XLR - 3 pin

IP Rating: IP20

Housing made: ABS

Cooling: Active

Height [cm]: 230

Width [cm]: 130

Depth [cm]: 105