www.flash-butrym.pl
4
5.3
Connecting power supply
The connection is performed using integrated power cable with Unischuko power plug.
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION!
In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
6
OPERATION MANUAL
6.1
Control panel
The control panel is equipped with display and 4 control buttons:
1.
MENU
2.
DOWN
3.
UP
4.
ENTER
6.2
Menu
Menu diagram:
11CH mode DMX Address set
A001-A512
6CH mode DMX Address set
d001-d512
Tilt on/off
t oN
t oF
Pan on/off
P oN
P oF
Demo mode
dE 1-dE 9
Sound mode
So 1-So 2
Reset
