- 7 -
Loosen the pressure wheel nut, to pass through the guide wire tube into the wire feed wheel
groove, adjust the pressure wheel pressure welding wire, guarantee the welding wire is not
sliding, and not blocking while feeding the wire.
The welding gun is inserted into the output socket of the front panel and screwed tightly.
And put the wire into the gun.
Unscrew the nozzle contact tip. And feed the wire through the torch. After the wire
successfully go through. Please install the contact tip. For fluxed core wire, please fasten
Ceramic nozzle, for solid wire please fasten copper nozzle.
2.2 MIG Torch explosive chart
Summary of Contents for FM 155E
Page 1: ...1 Operation Manual FM155E MIG Welding Machine...
Page 9: ...9...