Flann Microwave
SD5902 Waveguide Switch Driver
SD5902
Doc No ER15 Version 1.3
June 2020
8
USB Driver Installation
If the switch driver is to be connected to a computer via the USB interface, the supplied driver must be
installed on the computer. The driver supplied is compatible with Windows 2000, XP, XP 64bit, Vista,
Vista 64bit, 7, 8, & 10. Windows XP installation is as follows:
1.
Start up the computer and connect a USB
cable between the switch driver and
computer. Power up the switch driver. The
computer should identify the switch driver
and open the ‘Found New Hardware
Wizard’:
2.
Select ‘No, not this time’ and press ‘Next’
4.
Select ‘Install from a list or specific location
(Advanced)’.
5.
Select ‘Include this location in the search’
and Browse for the SD5902.inf driver file on
CD. Then press ‘Next’.
6.
The installer may warn about ‘Windows
Logo Testing’. The .inf installation file
supplied makes use of drivers which are a
part of Windows, so it is inherently
compatible with Windows. Press ‘Continue
Anyway’.
