Page 2 of 4
Fig. 1
Fig. 2
Fig. 3
Fuel effect
White & Glass Pebbles: Once the fire has been installed in the correct position unpack the pebbles from the accessory box and arrange on
the orange fuel bed in a random formation. Use the long clear right angled shelf to prevent any spill of the pebbles into the glass channel
on the front Fig.4. The glass may now be fitted.
Fig. 4
Log & Embers: Once the fire has been installed in the correct position unpack the fuel effect from the accessory box. Place each piece as in
the picture below. Do not overlap the front shelf Fig.4. The glass may now be fitted.
Fitting the Glass: Slide the top of the glass (whist holding at the base of each side) through the fire opening up both sides of the interior making
sure you start after the dampers and lift over the micro switch in the top left of the fire interior. Allow the bottom edge of the glass to sit into the
channel behind the shelf at the front of the fuel bed. Fig.5. To remove the glass, in the open fully tilted position hold from the very top, pull out of
the channel at the bottom and carefully remove through the opening.
Fig. 5
