7 |
P a g e
Place and hold the fire on the bottom bracket and screw the top bracket back onto the fire with the 13mm
self-tappers. At this point you will be able to level the fire accordingly when refitting the M6 bolts and washers
through the slots of the bottom bracket and back into the fire.
Your fire is now secure, make sure the mains cable is tightly fitted.
4.
Glazer fitting a Flamerite fireplace suite
Modular wall
8x 13mm screws. 4 top and 4 bottom
& freestanding
Modular chimney 3x M10 x 50mm Rawl plugs. 3x 60mm screws
breast
2x 50mm screws & cover caps. 4x 13m screws.
a.
When the fire is mounted to the wall, the base will slide on from the front between the flange running
around the opening and the pull-out tabs
A
. Make sure the power cable is firmly pushed into the fire
and does not foul the suite when up against the wall.
b.
Summary of Contents for Glazer 1000
Page 12: ...12 P a g e 450...
Page 13: ...13 P a g e 600 900 1000...
Page 15: ...15 P a g e...
Page 19: ...19 P a g e Radia Flame Nitra Flame Wiring Diagrams...
