Flamerite Fires Glazer 1000, Installation, Precautions & Servicing

Page: 4 / 19

4 | P a g e
DO NOT TWIST, FORCE OR SQUEEZE THE FIRE DURING THE INSTALLATION PROCESS.
There must be enough clearance for the fire to comfortably fit inside or against a wall. DO NOT SQUEEZE INTO
AN OPENING as this may deform the case and stop the glass from moving correctly.
The height at which you may wish to fix the fire in or on the wall is up to you, we recommend anywhere from
350-450mm from the floor to the bottom of the fire opening (not the bottom of the fire).
The fire must be well supported in or on any structure. A wall support or lintel should be fitted at the required
height to ensure the appliance does not support the weight of the finished wall or chimney breast. Never
secure to just plater board alone.
Minimum opening to fit and inset the fire
Model H W1side W2side W3side D
600 725mm 645mm 625mm 610mm 265mm
900 505mm 945mm 925mm 910mm 265mm
1000 575mm 1045mm 1025mm 1010mm 265mm
1500 575mm 1545mm 1525mm 1510mm 265mm
1800
575mm 1845mm 1825mm 1810mm 265mm
Visible burn area after fitting
Model H W1side W2side W3side D2/3 side
600 500mm 645mm 625mm 600mm 180mm
900 280mm 945mm 925mm 900mm 180mm
1000 350mm 1045mm 1025mm 1000mm 180mm
1500 350mm 1545mm 1525mm 1500mm 180mm
1800
350mm
1845mm 1825mm 1800mm 180mm
1 side 2 side 3 side
Installation Instructions