Flamerite Fires Essence Gotham 1300, Installation, Precautions & Servicing

Page: 5 / 13

5 | P a g e
When inserted into a wall, the front flange of the Gotham pictured below should fit behind the plaster board
and against the brick or stud work.
Visible burn area after fitting
Model H W
600 500mm 604mm
750S 408mm 754mm
750T 650mm 754mm
900 280mm 904mm
1300 280mm 1304mm
2. OmniGlide (inset)
Secured into place using the fixings provided.
Situ Screws Rawl Plugs
Stud Wall 4 x 35mm N/A
Chimney 4 x 35mm 5.5mm x 34mm
Fireplace 4 x 35mm 5.5mm x 34mm
Suite 4 x 15mm N/A
The minimum opening size to inset your fire
Model H W D
600 725mm 605mm 180mm
900 505mm 920mm 180mm
1300 505mm 1350mm 180mm
Looking at the arrows in the image below, four larger counter sunk holes are visible at each corner of the fire.
Secure the flanged area of the OmniGlide using the fixings provided in front of a finished wall.
Lift the decorative front over the screws protruding from the fire body and insert into the corresponding
keyhole slots and push down. The screws are adjustable for a tight fit.