The module has 24 patches with LFO settings. The first 12 patches are included preset patches
(see lists below). You can save your own settings on a further 12 user patches via SYSEX dump
(see SYSEX below). The SYSEX file of type “GLOBAL SETUP” can be used to determine which
patch is loaded when the module is switched on (as well as the MIDI receive channel for chan-
ging the patch). The default is MIDI channel 1 and preset patch 1.
To change the patch, send MIDI notes on the set receive channel. The patches are over 2 octa-
ves starting at note number 36 (see graphic).
On the Flame website in the download area you will find some ready-made SYSEX files for
USER presets and GLOBAL SETUPs.
3.5 PATCH SELECT - LEARN FUNCTION
10
USER PATCHES
Note Nr 48-59
PRESET PATCHES
Note Nr 36-47
1 2 3 4 5 6 7 8 9 10 11 12
1 2 3 4 5 6 7 8 9 10 11 12
LEARN (MIDI channel and PATCH Load number)
With the LEARN function you can specify the MIDI receive channel and the PATCH, which is
automatically loaded when switching on:
To do this, press the LEARN button until it flashes. Then send any note from your connected
MIDI keyboard on the desired MIDI channel. The new MIDI channel is automatically saved per-
manently.
If the received MIDI note is in the range from 36 to 59, the PATCH assigned to the note (see gra-
phic above) is loaded. In addition, this number is saved and now this PATCH is automatically loa-
ded when switching on.
The LEARN mode is automatically terminated after receiving the note (button LED off).
ADVICE:
If you only want to change the MIDI channel with LEARN, then select a note outside the PATCH
note range.
Factory reset:
To reset to the default, press and hold the LEARN button while powering on the module until it
is lit. Release the button.
The default settings are MIDI channel 1 and preset patch 1.
