REMOTE CONTROL FUNCTIONS
6
7
NOTICE
DO NOT press the buttons too quickly. Give the unit time to respond to each
command.
REMOTE CONTROL BUTTONS
FUNCTION
POWER ON/OFF
HEATER
FLAME
+ -
TIMER
Press once
to turn the power
and flame
ON
.
Press again
to turn the power
and flame
OFF
.
- LOW
- HIGH
- OFF
Press Flame (+/-)
to desired flame
brightness
.
6 options
.
Press Timer (+/-)
to turn the fireplace functions off
automatically after a pre-set time between
0.5 - 8 hours
in 30 minutes increments
.
The
“
time to off
”
setting appears in the digital display.
The display turns off after
10 seconds
.
NOTE
: The timer needs to be re-set each time the
fireplace is turned back on.
POWER ON/OFF
HEATER
-LOW
-HIGH
-OFF
FLAME TIMER
FLAME&SHADE
TEMP -
+ TEMP
+ -
TEMP
+ -
Press Temp (+/-)
to desired thermostat temperature
setting. The thermostat will automatically turn the
heater on and off to maintain the set temperature
between
62
℉
- 82
℉
range.
NOTE
: The heater will only turn on if the thermostat
setting is higher than room temperature.
When the room temperature reaches the thermostat
setting, the heater will turn off.
Press once for low heat (750w).
The fan starts and
warm air follows after 15 seconds.
Press again for high heat (1500w).
The fan blows
hot air.
Press again
to turn heat
OFF
.
NOTE
: The fan will continue to blow to allow heater
elements to cool down, and then turns off.
