29
INSTALLATION, USE AND MAINTENANCE
Fläkt Woods
FIFLO EN 2014.09
All rights reserved.
Control System FICO-128
23 Resetting control unit FCLA-128 to factory
settings
1
Go to
Log in
using the arrow keys, and then press
ENTER.
2
Log into the system using code 2000.
Use the arrow keys to select a number and press
ENTER
after each number. If your code was correct,
Login
level 2
is shown
.
3
Press
ENTER.
4
Go to the
System mode
menu using the arrow keys, and
press
ENTER.
5
Select
Mode
and press
EDIT
, and then press
ARROW
DOWN.
6
Press
ENTER.
7
The whole system is now in
Standby
; press
ESC
(dampers
close and fans stop).
8
Go to
Factory Settings
using the arrow keys, and press
EN-
TER.
9
Select
Continue
to reset factory settings on the FCLA-128
control unit.
When you now press
ENTER
, all settings will be deleted and
the FCLA-128 control unit will be reset.
10
Control unit FCLA-128 remains in
Standby
.
To re-configure the control unit, see Chapter 8, Item 8.
1
2
3
4
5
8
6
PASSWORD
7
0
9
ENTER
