17
INSTALLATION, USE AND MAINTENANCE
Fläkt Woods
FIFLO EN 2014.09
All rights reserved.
Control System FICO-128
12 Manual test of dampers, communication units,
and groups
1
Log into the system using code 1000, see Chapter 9.1. Press
ENTER
to enter
Menu
.
Select
Test & maintenance
using the arrow keys, then press
ENTER
.
Go to
Manual damper test
using the arrow keys, and press
ENTER.
2
Select
Manual damper test
in the
Test & maintenance
menu.
Select
Test communication unit
using the arrow keys, and
then press
ENTER
to show the menu.
(Run only one test at a time, and wait until it is completed be-
fore running the next one.)
3
Choose the communication unit that you want to test: for exam-
ple, address 01, using the arrow keys, and then press
ENTER
to
show the
Op information
menu
.
After testing the communication unit, press
ESC
and reselect the
Test & maintenance
menu, if you are testing other communica-
tion units.
The dampers connected to the communication unit are now
tested, and the fan relay connected to the communication unit
will open (fan stops). After completed test, the dampers will open
again.
4
Select
Manual damper test
in the
Test & maintenance
menu.
Go to
Test Group
using the arrow keys, and then press
EN-
TER
.
5
Go to the Group you want to test, e.g. Group A, using the arrow
keys, and then press
ENTER.
After testing the Group, press
ESC
and reselect
Test & mainte-
nance
to test a whole group of communication units.
The dampers connected to the communication units in Group A
are now tested and the fan relay in Group A will open (fan stops).
After completed test, the dampers will open.
6
Select
Test all
using the arrow keys, and then press
ENTER
to show the
Op information
menu, then press
ESC
to
enter
Menu
.
All dampers are tested and all fan relays open (fans stop), and
finally the dampers reopen.
