GLEC-6 - Installation and maintenance
8
FläktGroup
DC-10087-GB 2018-01-03_R0
Specifications are subject to alteration without notice
5. Remove M8 socket cap fixing bolts from back plate and M8
fixing bolts from both side members.
6. The front section can be lifted off now.
7. Remove impeller locking screw and washer from the motor
shaft end and pull the impeller out, if necessary use the ex-
traction tool.
8. Detach the motor cable from speed controller. Remove M8
bolts from both sides of the motor bracket and lift the motor
(with bracket still intact) away. Speed controller can be re-
moved by detaching the mounting bracket screws (both sides
of the bracket) and lifting it away with bracket still intact.
