Flaircomm Technologies Inc
.
-
8
-
Address: No.5 Bibo Road, Keyuan Building, 4F, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R.China
Telephone: 86-21-51088733 Fax:86-21-50276101
www.flaircomm.com
.
2.
Using Your Handsfree
2.1
Battery Charging and Usage
This device contains a rechargeable Li-Polymer battery. First-time charging time is about 4 hours. Later-on recharging
time is around 3 hours. Detailed charging procedures as follows:
1. Connect the charger cable to the device.
2. Plug the car charger into the cigarette lighter in your car to start charging. Icon indicator “
” will blink during
charging on the screen. Once the icon turns to “
”, it indicates the battery is fully charged and you can finish
charging. You can charge the battery both startup and shutdown.
Figure 2 Charging the battery
You can also use the USB charging cable for charging the device from your PC, which will take longer to charge as
the power output of the USB port is lower than it is with the car charger.
Once the battery is fully charged, it will provide to 8 hours of talk time and up to 600 hours of standby time.
When the battery is low, the device beeps once every 20 seconds and there is “Low Power” display in the screen,
charge the battery as described above.
Note that, over-charging will reduce battery life. If a fully charged battery is left unused, it will lose power over time.
Extreme temperature (either too hot or too cold) will also affect its ability to charge, capacity, and lifetime.
2.2
Mounting the Handsfree
This Handsfree device can be easily mounted inside the car by using the companion sun-visor clip to fix the product
on the sun-visor over the driver’s seat. As shown in Figures 3, there are two magnetic tips on the backside of the
device. You can attach the sun-visor clip to them. For better mounting, please adjust the sun-visor clip to appropriate
angle first (as shown in Figure 4), and clip to the sun-visor before properly attach the device to the sun-visor clip.
Note that, the microphone of the Handsfree must aim at the sound bearing.
