Flaircomm Technologies Inc
.
-
15
-
Address: No.5 Bibo Road, Keyuan Building, 4F, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R.China
Telephone: 86-21-51088733 Fax:86-21-50276101
www.flaircomm.com
.
8. For voice communications such as chatting over the Internet, you must disconnect “Bluetooth AV Service”, and
connect “Bluetooth Headset Service”. First, right click “BTHF180”, and choose “Disconnect
—
>Bluetooth AV
Service”.
9. Then, right click “BTHF180” and choose “Connect
—
>Bluetooth Headset Service”. Once you hear indicating
tones from the handsfree, press button to make the connection.
10. After setting up the connection, from the “Control Panel” you start “Volume and Audio Device” and configure
the default device to be “Bluetooth AV/HS Audio”. Now you can use handsfree’s microphone to conduct voice
communications.
Note that, when connecting with “Bluetooth AV Service”, you can use Handsfree’s buttons to control the remote
device, such as “play”,” pause”, select music, and control Volume up and down. But, you can’t use the microphone
at the handsfree side for voice communications. On the other hand, when connecting with “Bluetooth Headset
Service”, you can listen to the music and use handsfree’s microphone. However, you can’t use the handsfree to
control the remote device.
If you use Bluetooth windows driver other than IVT’s BlueSoleil, you may follow software vendor’s user manual to
complete paring and connecting your handsfree with your USB dongle.
Connecting Both AV player and Handset
This product can connect with an AV player and a Bluetooth handset at the same time. This allows you to receive and
make phone calls while listening to music.
Detailed operation procedures are as follows:
1. Pair your handset with the handsfree (see Section 2.5 for details) to ensure that the handsfree has stored the
pairing information of the handset. If the handset has paired with the handsfree, you can skip this process. If the
handset automatically establishes connection with the handsfree at the end of paring, you need press and hold
button for 3 seconds to drop the connection.
2. Pair and connect the handsfree with your AV player (see Sections 2.5 for details) to enable AV mode functions.
3. Follow handset’s manual to initiate the connection from the handset side (see Section 2.5 for details).
While listening to music, the product will notify the user an incoming call. You can pause the on-playing music to
accept the incoming call or reject following the same button operations specified in Section 2.6. After ending the call,
the music playing will be automatically. If you want to make a phone call while listening music, you can either dial a
number from phonebook or via voice dialing, the handset will also pause playing music accordingly.
