Press
Decrease
Increase
- 9
–
Forward/ Reverse Rotation
Switch Operation
To prevent damage, do not press
Forward/Reverse button until the
anvil comes a complete stop.
Forward Rotation Operation
The tool is in forward operation if
the blue light is not on.
Reverse Rotation Operation
By long press on the F/R switch,
users are able to choose the mode
of Reverse operation, either auto-
matic or manual.
Mode 1: Automatic
– Tool returns to
Forward
operation
automatically
after reverse operation.
Mode 2: Manual
– Tool needs to be
adjusted manually to return to For-
ward operation after reverse opera-
tion.
How to adjust: Long press on the
F/R switch and release it as seeing
the flashing blue light is on. The
mode is transformed successfully.
Steps for Torque Adjustment
1.
(1)For Wrench
: Open the cover,
use an open end wrench to ro-
tate the square drive until the ad-
just hole position appears in the
area of the hole of cover.
NOTE: MUST
remove the bat-
tery pack before adjusting the
torque and press the trigger to
make sure no power connected.
Or, it may create a risk of injury.
2. Turn the torque adjustment tool
clockwise
to
increase
the
torque and counterclockwise to
decrease the torque.
(2)For Screwdriver:
Lift the torque
adjustment over. Take the torque
adjust tool and insert it to the quick
change holder and turn until the ad-
just hole shows up.
NOTE: MUST
remove the battery
pack before adjusting the torque
and press the trigger to make sure
no power connected. Or, it may
create a risk of injury.
Cover
Adjust Hole
Square Hole
Adjust Hole
Cover