Flaem AirMate P0504EM F400, Instructions For Use Manual, Page: 16 / 68

14 15
TROUBLESHOOTING
Switch off the device before any procedure and unplug the power cable from the
socket.
PROBLEM CAUSE SOLUTION
The device does not work
The power cable has not
been correctly inserted
into the socket of the de-
vice or the power socket
Correctly insert the power cable in
sockets.
The device does not
nebulize or
nebulizes
insufficiently.
The medication has not
been inserted in the
nebulizer
Pour the right amount of medication
in the nebulizer
The nebulizer has not
been properly fitted.
Disassemble the nebulizer and
reassemble it correctly as shown
in the connection diagram on the
cover.
The nebulizer nozzle is
clogged
Disassemble the nebulizer, remove
the nozzle and perform cleaning
operations Failure to remove
medication deposits from the
nebulizer affects its efficiency and
operation.
Strictly comply with the instructions
contained in the “ CLEANING,
SANITISATION, DISINFECTION”
chapter
The air pipe is not cor-
rectly connected to the
device
Ensure the device’s accessories
are properly connected to the air
intake (see connection diagram on
the cover).
The air pipe is bent, da-
maged or twisted
Unwind the pipe and ensure it is
not crushed or punctured. If
necessary replace it.
The air filter is dirty Replace the filter
The apparatus is
noisier than usual
The Filter is not correctly
inserted in its housing
Fully and properly insert the Filter in
its housing
If after verifying the above mentioned conditions the device should not operate
properly, contact your trusted retailer or the nearest authorized FLAEM service
center.