USER MANUAL
ADITIONAL INFORMATION
TIPS AND TRICKS
• To utilize the needle depth adjustment feature of the grip, you will turn the grip clockwise in order to shorten
the needle depth and counterclockwise in order to lengthen it.
• It is safe to extend the grip (shorten the needle depth) to the end of the alignment indicator line.
Do not attempt to extend the grip past this point while tattooing as this will disassemble the grip.
• It is recommended to lubricate the outer surface of the Cartridge Receiver with ointment after sterilization
• To protect the internal parts avoid dropping the grip
• You may autoclave the Cartridge Receiver and the Ratchet disc together in the same autoclavable pouch,
however, they must be separated from the metal portions of the grip.
• The Grip Guide and Back Stem are pressure sealed, do not attempt to disassemble.
• In order to maintain the grip and reduce friction it is recommended to introduce a small amount of oil or
ointment to the threading of the grip guide. There should not be visible lubricant deposits.
• DO NOT ULTRASONIC WASH
• Do not attempt to assemble the grip while attached to a machine that has a built-in drive bar. The grip
should only be introduced onto a machine after all pieces have been joined.
For service inquiries, warranty claims or replacement parts please contact [email protected] or
phone at 1-855-FKIRONS. For additional tips and tutorials, please visit Youtube.com/fkirons
