USER MANUAL
GRIP OVERVIEW
GRIP FEATURES
• Fully Autoclavable
• Patent Pending Tool-less disassembly system allows the grip to
be broken down into 4 pieces for complete sterilization with ease.
• 3mm internal bore for compatibility with all drive bar tip styles.
• Compatible with ALL major cartridge systems allowing you the
freedom to tattoo with the needles you prefer.
• Patent Pending One- Piece Ratchet Disc mechanism provides
superior adjustment feedback and prevents unwanted turning
even when used with heavier steel machines.
• Ribbed Anti-Slip Back Stem ensures secure locking
and prevents spinning in all machine vises.
• Lifetime Warranty
• Made in the USA
Your new RPG Click is composed of 4 main pieces pictured below:
1. Grip Adjuster
2. Cartridge Receiver
3. Ratchet Disc
4. Combined Grip Guide & BackStem
The Grip Adjuster (1) houses the Cartridge Receiver (2)
and allows the turn depth adjustment while the Grip Guide (3)
ensures that the cartridge remains upright and houses the
Ratchet Disc (4) which provides adjustment feedback and
prevents unwanted turning and accidental adjustment of the grip.
DISASSEMBLY
The grip must be disassembled completely prior to sterilization.
In order to disassemble the grip, with the Back Stem secured in a machine vise,
simply unscrew the Grip Adjuster from the Grip Guide to separate.
Remove the Cartridge Receiver from the Grip Adjuster by turning the Grip
Adjuster upside down. If the Cartridge Receiver does not immediately
drop from the Grip Adjuster gently shake the Grip Adjuster to dislodge the
Cartridge Receiver from the locking groove, to not force its removal as a
sequence of counter grooves hold it in place.
Next, you will simply push up on both open ends of the Ratchet Disc to
separate it from the Grip Guide and can remove the Grip Guide from the
machine vise.
1
2
3
4
