Fixturlaser Shaft 100, User Manual

Page: 59 / 66

59
F
IXTURLASER
S
HAFT
200
T
HE
V
ERTICAL SHAF T ALIGNMENT
PROGRAM
Starts the Application set-up
program.
Opens the entry field for number
of bolts.
Registers measurement value at
the 9 o’clock position when
using the Clock method
Registers measurement value at
the 3 o’clock position when
using the Clock method.
Registers measurement value at
the 12 o’clock position when
using the Clock method.
Prints out a screen dump.
Restarts the measurements with
entered values.
Saves the measurement in the
non-volatile memory.
T
HE
TD
VALUE DISPL AY PROGRAM
Starts the application set-up
program.
Prints out the readings and
additional information.
Restarts the measurements with
entered values.
Zeroes the TD-M value/resets to
raw data.
Halves the TD-M value.
Turns on/off filter function. Filter
time is set in the application set-
up menu.
Exits the program and returns to
the main menu.
p-0040r2.p65 1998-01-23, 13:43 59