manualshive.com logo in svg

Fixturlaser Shaft 100, User Manual

The Fixturlaser Shaft 100 is a precision shaft alignment tool for accurate machinery alignment. Ensure optimal performance with the user manual available for free download on manualshive.com. This manual provides step-by-step instructions for easy setup and alignment, ensuring efficient operation of your equipment.

Share
Download
background image

30

F

IXTURLASER

 S

HAFT

100

T

HE

 C

LOCK

 M

ETHOD

P

ROCEDURE

1.

From the main menu touch the 

Horizontal Shaft Alignment icon (program 1).

2.

The screen shows the movable machine. The grey areas are data entry fields.
Measure the distance A. Touch the A field and enter the value. Confirm with
OK. Continue with the B and C dimension. The D dimension is set by default
to half the A measure, but can be changed by touching the D field and
entering the correct value.
Note: The A dimension is measured from centre to centre of the rods. The B
dimension is measured from rod centre to first bolt centre and the C dimen-
sion is measured between the bolt centres.

3.

Stand by the machine to be adjusted facing the stationary machine.

p-0040r2.p65

1998-01-23, 13:43

30

Summary of Contents for Shaft 100



































































Reviews:

No comments

Related manuals for Shaft 100

Brands by name

Popular brands

Load more brands