Owner’s manual
|
STAGE HERO
10
1.7 ReaR Panel
POWERED OUTPUTS
Connect these 6,35mm (¼“) output connectors for left and right speakers inputs.
Rated output power is 100 Watts. The unit can properly work with 4-Ω and 8-Ω impedance speakers, even if it will develop less power.
Don’t connect lower impedance speakers.
MAINS
This is the mains cord. Before plugging it to a AC power supply, please kindly check whether the amplifier marked voltage is conform
to local voltage or not. Then connect the power cord to a mains plug complying to local mains socket.
FUSE
This fuse holder contains a standard fuse, which is used to protect amplifier from damages. If the amplifier is connected to power supply but
“Power ON” LED is not lit, please check the fuse status. If you found the fuse broken, you must replace it with a same specification fuse.
VENTILATION PORT
This is the ventilation port, NEVER block it, otherwise internal power amps could be damaged by internally developed overheat.
25
27
26
28
