The Edit pages allow you to select and edit a Part independently
of the Vector’s main UI. For instance, you could be editing a
monophonic pitched part on the Vector, while editing a Drum part
on the Launchpad.
The first of the Edit pages is for navigation: It displays one row of
buttons, colored to match the Parts on the Vector. Push one of
them to edit that Part. To return to the Nav page at any time,
push the Edit button again.
Editing Mono Parts
For editing pitched parts, the top row of the grid is used for
selecting the octave within which you wish to enter notes, while
the lower 7 rows are used for entering pitches. Each column is
one step, and each row is one pitch value, starting with the
unison (scale degree
I
) pitch on the bottom row, then proceeding
through scale degrees as you go up:
II
,
III
,
IV
,
V
,
VI
,
VIII
. To
enter a sharped or flatted note, hold the pad for a that note, then
press the pad above or below it. Pitches that are in the current
octave are shown in green. As you shift the octave around,
pitches below the current octave will be red, pitches above will
be amber
23
In addition to the buttons on Row 1, you can use the up and
down buttons to change octave. Use the left and right arrow
buttons to scroll through longer sequences.
Launchpad: Edit
Nav Page
Edit
Edit Mono/Chord Page
Edit
