manualshive.com logo in svg

Five12 Vector, User Manual

Share
Download
Five12 Vector User Manual Download Page 19

PRESETS

.

Each Part on the Vector supports up to 20 Presets, depending on the 

maximum length of the sequence. Press the 

Preset 

button to see all 

the Presets for the current Part in a grid. Empty Presets are shown as 

"..", non-empty Presets are shown by name. To select a new Preset on 

the current row, use the white mini keyboard buttons. To change rows, 

use encoder 

9

.

Use 

Shift+Preset 

to duplicate the current Preset into an empty Preset 

'slot'.  Use 

Shift+Clear 

to empty out a Preset. Preset changes are 

quantized to bars by default. This setting, called 

PQNT

 (Preset 

Quantize)

 

can be changed on the 3rd 

Seq Ctl 

page for each Part.

PLAYLISTS 

To edit the name and Playlist settings for a Preset, push 

Preset

, then 

Prev 

or 

Edit

. Alternatively, use 

Prev/Next 

to move between 

Preset 

Edit

, 

Preset 

and 

Scene 

pages.

The Playlist is simple in concept, but very flexible. Each Preset can:

• Play forever (by default).

• Play for 

x

 beats/bars then go to a later Preset.

• Play for 

x

 beats/bars then go to an earlier Preset and repeat 

y

 times.

Use encoders 

4-8

 to edit the Playlist settings for a Preset. The master 

on/off switch for all Playlists is on the first 

GLOBALS 

page.

SCENES

The 

Scene 

page displays the current Presets for all 8 Parts. You can 

directly set the Preset for a Part in the current Scene using the 8 main 

encoders. Use encoder 

9

 to move between Scenes. To trigger a new 

Scene, use the 

Cue 

button or push encoder 

9

. Scene changes are 

always quantized to a bar.  Dialing a Preset all the way left will generate a 

rest symbol indicating no Preset will be played for that Part within this 

Scene. 

18

Preset/Scene

Preset/Scene

Presets, Playlists & Scenes

Summary of Contents for Vector





























Reviews:

No comments

Brands by name

Popular brands

Load more brands