14
Examination table as Annex 2. (Pg. 27-30)
6-6. Items to examine yearly
6-6-1. Check and fill in LUBRICANT OIL for every part of the hoist after it has been
operated for one year
6-6-2. Check GEAR BOX of hoist:
Check the wear condition of gear, the function of ball bearing, and the tightness
of locking bolt
6-6-3. Check BRAKE
Check the wear of lining, brake plate, lining’s motion, and test its function
6-6-4. Examine if ELECTRO-MAGNETIC BRAKE is in good condition
6-6-5. Examine MOTOR
Examine if you could hear NOISE when motor runs, please see if the BALL
BEARING is in good condition
6-6-6. Inspect LIMIT SWITCH
Check the wear of contact point, tightness of bolt, and test the switch’s
performance
6-6-7. SHEAVE and WIRE ROPE shall be examined monthly
6-6-8. Check Trolley wheels & end carriage wheels:
Inspect the wearing condition of wheel surface, ball bearing, and gear
6-6-9. If each part has been identified as NORMAL, then lift the goods 10-20cm higher
and decline the goods 10-20cm lower repeatedly. If nothing wrong, general lifting
activity may be started again
Examination form as Annex 2. (Pg. 27-30)
Summary of Contents for M Series
Page 1: ...M series OPERATIONS MANUAL ...
Page 24: ...FiTOP 20160620 ...
