10
FORCE PLATE 1000 Kg
Capacity
FORCE PLATE 400 Kg Capacity
Fitness Technology, 21 Bishop Street, Skye SA 5072 Australia
Tel: +61 8 8331 9229 Mob: 0418 815 400. www.fittech.com.au
Copy
right: Fitness Technology, Adelaide, Australia 21
st
March 2005. Issue 2.00, 21st Aug 2008
7.
To start receiving
data from the 400S press the “
Start Continuous Data Transfer
” button. If the
equipment is operating correctly you will see “analogue” bars next to each channel and a digital
value on the right hand side. If nothing is displayed this is because the internal error checking in the
XPV7 has detected a fault and is not sending faulty data.
8.
If you are not receiving data then press the “
Stop Continuous Data Transfer
” button.
9.
So that you can determine which channel has caused the fault you must click on the
“
DISABLE
ERROR CHECKING
” checkbox then press the “
Start Continuous Data Transfer
” button. Note, with
a tick the checkbox the caption changes to “
DIAGNOSTIC
”. Now you should see one or more
channels reading zero.
