12
ASSEMBLY
Step 3
3a. Installing the Left & Right Pedal Straps to the Pedals:
Install the
Left Pedal Strap (30)
onto
the
Left Pedal (29)
. Install the
Right Pedal Strap (28)
onto the
Right Pedal (27)
. See
Figure A.
3b. Installing the Left Pedal:
Insert the threaded shaft of the
Left Pedal (29)
into the threaded
hole on the
Left Crank (60)
. Turn the pedal shaft by hand in a
counter-clockwise
direction until
snug. Finish off the tightening of the
Left Pedal (29)
in the same direction as instructed with the
Multi Hex Tool
with Phillips Screwdriver
.
3c. Installing the Right Pedal:
Insert the threaded shaft of the
Right Pedal (27)
into the threaded
hole on the
Right
Crank (81)
. Turn the pedal shaft by hand in a
clockwise
direction until snug.
Finish off the tightening of the
Right Pedal (27)
in the same direction as instructed with the
Multi
Hex Tool
with Phillips Screwdriver
.
WARNING
: Tighten the pedal shaft in the direction instructed for the
Right Pedal (27)
and
Left
Pedal (29).
Failing to do so may strip the threads on the pedal shafts.
Multi Hex Tool with Phillips
Screwdriver
1PC
Tool:
Summary of Contents for X CLASS 410 ST
Page 5: ...3 LABEL PLACEMENT ...
Page 8: ...6 OVERVIEW DRAWING ...
Page 11: ...9 HARDWARE TOOL PACK ...