Fitness Reality 081821, Owner'S Manual

Page: 7 / 26

Warning : It is highly recommended that you have assistance during the assembly of the strength
equipment.
1. Tools for assembly:
General tools you may need for the assembling this strength equipment:

Metric Allen Key Set

Metric Wrench Set and Adjustable Wrench

Flat Screwdrivers

Phillips Screwdrivers

Rubber Mallet

Silicone Spray Oil
2. Insert bolts into the frame as illustrated in the drawing of each of the steps.
3. Hand-tighten the bolts, nuts, and screw during assembly. Hand-tightening will allow for easily aligning
the parts during assembly. Tighten all the hardware once the entire unit has been completely
assembled.
4. It is highly recommended that a professional installer assembles the strength equipment. But, with the
proper assistance, the right tools, and strictly following the assembly steps, and given enough time;
the assembly of the unit can be achieved without professional help.
5. Thoroughly read each step before proceeding to assemble the parts of that step.
6. To aid in the
assembly of the equipment, the hardware pack (bolts, nuts, washer…etc.) have been
presorted according to their corresponding steps. See the Hardware Pack page.
7. When the equipment is fully assembled check all the functions for correct operation. Consult the
manual if you experience any issues, or for further help please contact our service department. See
page 2.
ASSEMBLY PREPARATION
5