Fitness Reality 081821, Owner'S Manual

Page: 15 / 26

2A. Attach four Gusset Plate (G) to the Base Beams (F) by using:
4 - (32) Hexagon Head Bolt
8 - (67) Washer
4 - (75) Nylon Lock Nut
2B. Attach two Upright Frames (N) to the four Gusset Plate (G) by using:
4 - (32) Hexagon Head Bolt
8 - (67) Washer
4 - (75) Nylon Lock Nut
Note: attached one Upright Frames (N) to the Gusset Plate (G) firstly. Lift up a
little to make sure the holes on Upright Frames (N) align with Gusset Plate (G) .
Tighten the Bolts (32) , Washers (67) , and Nuts (75) by wrench provided.
Repeat the process again to install the other Upright Frames (N) .
Give the cage a shake so all the structure can settle and then
thoroughly tighten ALL the hardware.
STEP 2
13
Appearance upon completion of Step 2