FitLogic YK-ET1403A, Instruction Manual

Page: 11 / 21

10
[
键入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置。请使用
can change the data by pressing
“
-SPEED +
”
and then press the
“
START
”
key.
3)
“
START
”
key which is for activating the machine. You can start the machine anytime when the machine is
switched on and the safety key is in correct position.
4)
“
STOP
”
key which is for stopping the machine working and reset the machine to zero.
5)
“
SPEED+
” “
SPEED-
”
which is for changing the speed. In setting mode it can change the target data and in
normal working mode it can change the speed by 0.1km/h per time. When you press the
“
SPEED+
”
“
SPEED-
”
key lasting for 0.5 sec the speed data will change continuously.
6)
“
SPEED
：
2.4.6.8.10.12
”
key which is for choosing the speed directly.
3. Start-up Quickly(Manual)
：
1) Switch on and put the safety key in correct position.
2) Press the START key and then the machine will work at a speed of 0.8km/h after the beeper countdown
from 3 to 1.
3) Press the
“
SPEED+
” 、 “
SPEED-
”
to change the speed according to your need.
4. Working Operation:
1) Press the
“
SPEED+
” 、 “
SPEED-
”
key to increase or decrease the speed.
2) You can change the speed directly by pressing the speed key
“
2.4.6.8.10.12
”
.
3) Pressing the STOP key to stop the machine from working and reset the data to zero.
4) The pulse window will display your heart rate by holding the handle pulse for 5 sec end.
5. Manual Mode:
1) Press the START key and then the machine will work at a speed of 0.8km/h and all other window will count
from 0 in standby mode. Press the
“
SPEED+
”
、
“
SPEED-
”
to change the speed.
2) In standby mode press the MODE key to enter into time countdown mode H1.
“
10:00
”
will be flashed
displaying in the TIME window. Press the
“
SPEED+
”
、
“
SPEED-
”
key to change the data from 5:00 to 99:59.
3) In time countdown mode press the MODE key to enter into distance countdown mode H2.
“
1.00
”
will be
flashed displaying in the DIS window. Press the
“
SPEED+
”
、
“
SPEED-
”
key to change the data from 0.5 to
99.9.
4) In distance countdown mode, press the MODE key to enter into calorie countdown mode H3,
“
50
”
will be
flashed displaying in the CAL window. Press the
“
SPEED+
”
、
“
SPEED-
”
key to change the data from 10 to
999.
5)
Choose one of the three countdown mode and then press the START key and the machine will work after 3
sec. press the
“
SPEED+
”
、
“
SPEED -
”
key to change the speed. Press the STOP key to shut off the
machine.