FitLogic MIRACLE R280, Owner'S Manual, Page: 15 / 84

14
5. When setting is finished, press “START” button to start up, the
treadmill will run after 3 seconds, press “”,”INCLINE-”,
“SPEED+”, “SPEED-” to adjust the speed and the incline; press the
PAUSE, the treadmill will stop.
PRESET PROGRAMS:
This treadmill has 15 preset programs. Under the standby status,
press “PROGRAM” button, the window of “SPEED” will P1-P15. After
choosing the program that you need, the TIME window will flash and
display the preset time10:00, press “”,”INCLINE-”, “SPEED+”,
“SPEED-” to set up the exercise time that you need. Press “START”
button to start the preset program. The preset program is divided into
10 sections. Each exercise time=the setting time/10. When the system
enters into the next section, it will make 3 sound “Bi—Bi—Bi“, then the
speed and the incline will be changed according to the setting speed
and incline of the program, then press “”,”INCLINE-”,
“SPEED+”, “SPEED-” to change the INCLINE and SPEED as you need.
When the program enters into the next section again, the system will
make 3 sound “Bi—Bi—Bi“, then the speed and the incline will become
the speed and the incline of the preset program automatically. After
the program is completed, the system will make 3 sound “Bi—Bi—Bi”,
and the treadmill will decrease the speed slowly to END. After 5
seconds, the treadmill will become standby state.