FitLogic MIRACLE R280, Owner'S Manual

Page: 12 / 84

11
4. “TIME” window: Display the running exercise time. Counting from
0:00 to 99:59, when it reaches 99:59, the speed of the treadmill will
be slowly decreased and finally “END” will be shown. After the
treadmill stops completely, the unit will become STANDBY status.
Counting from the target data down to 0:00, when it reaches 0:00, the
speed of the treadmill will also be slowly decreased and finally “END”
will be shown. After the treadmill stops completely, the unit will
become STANDBY state after 5 seconds.
5. “SPEED” window: On setting status, it will display
“P1-P15-U1-U3-FAT”. On operation status, it will display the current
speed, and the speed range is 1.0-20KM/H(Kilometer) or
0.6-12MPH(Mile).
6. “PUL.” Window: When the user grasps the handle bar sensors, the
pulse data will be shown in the window, and the range is 50-200
times/min. (This data is just for reference, do not use it as the medical
data)
7. “PROFILE/LAPS” window: Display the program selected under
standby state; display standard racetrack position under running
state.
BUTTON FUNCTION:
1. “PROGRAM” Button: When the treadmill is under standby state,
press this button to choose the exercise time “0:00” or the following 19
operation
modes of “P1-P2-P3-P4-P5-P6-P7-P8-P9-
P10-P11-P12-P13-P14-P15-U1-U2-U3-FAT” (FAT is the body fat
testing function). Manual mode is the default mode with speed 1.0
KM/H. (0:00 is manual model, P1-P15 is preset program and U1-U3 is
the user’s self-set program).
2. “MODE” Button: Press this button to choose the modes: “0:00”,
“15:00”, “1.0” and “50” (“0:00” is manual mode, “15:00” is the time
count-down mode, “1.0” is the distance count-down mode and “50” is
the calorie count-down mode). When you choose each mode, you can