FitLogic FREEWILL R115, Owner'S Manual

Page: 16 / 79

15
U1, U2, U3: Besides the 12 preset programs, you can also set up another 3 user’s
programs for user’s programs as your need: U1, U2, U3.
1. User’s programs setting:
Press the button “PROGRAM” until it shows the user’s program (U1-U3), then
press the “MODE” to enter into the setting. For the first section, press “SPEED+”,
“SPEED -” to change the speed, and press “”, “INCLINE -” to change the
incline. Press “MODE” to complete the setting of the first section and also go to
the setting of the next section till all the 10 sections are completed. The setted
data will be saved without losing due to the power off until next time when you
reset it.
2. Start-up of the user’s program:
Under the standby state, press “PROGRAM” until it shows the user’s program
(U1-U3), set the running
time that you need and press the “START” button for starting the treadmill.
3. User’s program set-up explanation:
Each user’s program divides time to be ten sections, the treadmill can only be
started after the speed and the incline are set well for the 10 sections and the
running time can also be set well.
Range of programs:
SETTING CONTENT
BEGINNING SETTING
OF
BEGINNING
SET-UP
RANGE
DISPLAY RANGE
TIME(MIN:SECOND) 0:00 15:00 5:00-99:00 0:00
－
99:59
INCLINE(%) 0 0 0-12 0-12
SPEED(K/h) 1.0 1.0 1.0-16 1.0-16
DISTANCE(K) 0 1.0 0.5-99.9 0.00
－
99.9
PULSE(hypo/min) P N/A N/A 50-200
CALORIE(THERM) 0 50 10-999 0
－
999