FitLogic FREEWILL R115, Owner'S Manual

Page: 11 / 79

10
5. “CAL /PULSE” window : Display the runner’s pulse and calories data. Counting
from 0 to 999, when it is over 999, the display will be reset to be 0 and the
counting will start again from 0 to 999. Counting from the target data down to 0,
when it reaches 0, the speed of the treadmill will also be slowly decreased. After
the treadmill stops completely, the unit will become STANDBY state. When the
runner grasps the hand pulse, it will test pulse after 5 seconds and show the data
in window, the relevant light will show at the same time, pulse range is 50 to 200
hypo/min ( the data is just for reference, can not be used as medical data).
BUTTON FUNCTION:
1. “PROGRAM” Button: When the treadmill is under standby state, press this
button to choose the exercise time “0:00” or the16 different programs
from”P1-P2-P3-P4-P5-P6-P7-P8-P9-P10-P11-P12-U1-U2-U3-FAT”. Manual mode
is the pre-set mode and the pre-set speed of the manual mode is 1KM/H. (0:00
is the manual mode, the pre-set program is P1-P12)
2. “MODE” Button: Press this button to choose the modes: “0:00”, “15:00”, “1.0”
and “50” (“0:00” is manual mode, “15:00” is the time count-down mode, “1.0”
is the distance count-down mode and “50” is the calorie count-down mode).
When you choose each mode, you can press the speed button and incline button
to set the target count-down data, after that, press the START button to start the
treadmill.
3. “START” button: When the power is on and the safety key is attached onto the
console, press this button at any time, it can start the treadmill.
4. “STOP” button: While running the treadmill, press this button at any time to
stop the treadmill and return all the data back to 0.
5. “SPEED+”, “SPEED-” Button: After starting the treadmill, press “SPEED”
button to adjust the speed and the adjustment range of speed is 0.1km each time.
When pressing “SPEED” button for more than 0.5 seconds, the speed will be
continuously increased or decreased.
6. “INC+”, “INC-” Button: After starting the treadmill, pressing “INCLINE”
button can adjust the level of incline and the adjustment range of speed is 1
section each time. When pressing “INCLINE” button for more than 0.5 seconds,
the incline level will be continuously increased or decreased.
7. “SPEED: WALK, JOG, RUN” quick access button: WALK, JOG and RUN are for 5,
8 and 12 kilometer, with which you can do quick setting of the speed.
8. “INCLINE: LOW, MID, HIGH ” quick access button: LOW, MID and HIGH are for