FitLogic freewill d225, Owner'S Manual

Page: 20 / 79

19
MAINTENANCE INSTRUCTIONS
WALKING BELT CENTERING AND TENSION ADJUSTMENT
DO NOT OVERTIGHTEN the walking belt. This may cause reduced motor
performance and excessive roller wear.
TO CENTER WALKING BELT:
● Place treadmill on a level surface
● Run treadmill at approximately 3.5 mph
● If the belt has drifted to the right, turn the right adjusting bolt 1/2 turn
clockwise and the left adjusting bolt 1/2 turn counterclockwise
● If the belt has drifted to the left, turn the left adjusting bolt 1/2 turn clockwise
and the right adjusting bolt 1/2 turn clockwise and the right adjusting bolt 1/2
turn counterclockwise
Picture A If the belts has drifted to the LEFT Picture B If the belts has drifted to the RIGHT
WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE
CLEANING OR SERVICING THE UNIT.
CLEANING
General cleaning or the unit will greatly prolong the treadmill.Keep treadmill
clean by dusting regularly. Be sure to clean the exposed part of the deck on either
side of the walking belt and also the side rails. This reduces the build up of foreign
material underneath the walking belt.
The top of the belt may be cleaned with a wet, soapy cloth. Be careful to keep
liquid away from inside the motorized treadmill frame or from underneath the
belt.
Warning
：
Always unplug the treadmill from the electrical outlet before
removing the motor cover. At least once a year remove the motor cover and
vacuum under the motor cover.
PIC A
PIC B