10
You can
also
check your battery level on your Fitbit dashboard.
Charging your tracker
To charge your
tracker:
1.
P
lug the charging
cable into the USB port on your computer or a UL
-
certified
USB wall charger
.
2.
Press the tracker into the
compartment
on
the charging cable
The pins on the
charging cable must
align with the corresponding pins on the back of the
tracker and
lock
securely in
place.
You’ll know the connection is secure when
the tracker vibrates and
you
see
the indicator lights blinking
,
i
ndicating your
progress towards a total charg
e.
Charging fully takes
about
two
to three
hours. While the tr
acker charges,
each white
light that turns on represents 25% of the maximum charge.
When Flex 2 has charged
completely, you’ll see
a green light and then all five lights will
shine
for
a few
seconds
before turning off.
If you don’t see any lights
flashing, y
ou can double
-
tap your tracker to check the
charging progress. You’ll know your tracker is fully charged when you see one green
and four white indicator lights.
Care
It’s important to clean and dry your
Flex
2 regularly. For instructions and mo
re
information see
http
://www.fitbit.com/productcare
.
Always remember to keep it
clean; keep it dry; don’t w
ea
r it too t
ig
ht; and give your wrist a rest.
Even though Fitbit Flex 2 is swim
-
proof, it’s impor
tant to thoroughly dry your classic
elastomer band and tracker, and remove any debris from your device after wear in
the water, to avoid skin irritation. Please note that
pendant
and bangle accessories
should not be worn in water.
