26
ASSEMBLY INSTRUCTIONS
STEP 12
1. Install the Lat bar (A23) onto the
selection bar cable (E29), to connect
these together you will to attach a clip
hook (C4).
2. Attach 2 clip hooks (C4) on either side
of the join chain (C5). Attach 1 side to
the lower pulley cable (E30) and attach
the other side to the pull bar (A24).
3. Install the 4 weight covers (A26) on the
net cover frame (D4).
4. Slide the net cover plate (D4) onto
the 2 guide rods (A6). Then place the
positioning rings (E5) onto the guide
rods (A6).
Summary of Contents for TF-7005A
