11
ASSEMBLY INSTRUCTIONS
STEP 6
1. Remove two M8x40 Carriage Bolts (83) two Ø8 Arc Washers (76) and two M8 Cap Nuts (75)
from the Rear Handlebar (3). Then fix the Rear Handlebar (3) onto the Lower Back Support
Post (74) with removed two M8x40 Carriage Bolts (83), two Ø8 Arc Washers (76) and two M8
Cap Nuts (75). Tighten cap nuts with Spanner with the Phillips Screwdriver provided.
2. Remove two M8x45 Carriage Bolts (69), two Φ8xΦ16x1.5 Flat Washer (67) and two M8 Cap
Nuts (75) from the Lower Back Support Post (74). Then attach Lower Back Support Post (74)
onto Seat Post (5) with two removed M8x45 Carriage Bolts (69) two Φ8xΦ16x1.5 Flat Washer
(67) and two M8 Cap Nuts (75). Tighten cap nuts with spanner with the Phillips Screwdriver
provided.
STEP 7
1. Remove one M8x85 Hexagon Bolt (85) two Φ8xΦ16x1.5 Flat Washers (67) one M8 Cap Nut
(75) from the Upper Back Support Post (87). Then attach Upper Back Support Post (87) onto
Lower Back Support Post (74) with one removed M8x85 Hexagon Bolt (85), two Φ8xΦ16x1.5
Flat Washers (67) and one M8 Cap Nuts (75). Tighten cap nuts with S6 Allen Wrench and
spanner with the Phillips Screwdriver provided.
2. Remove four M8x50 Hexagon Bolts (88) four Ø8 Arc Washers(76) from the Upper Back
Support Post (87). Then attach the Back Rest (89) onto the Upper Back Support Post (87) with
removed four M8x50 Hexagon Bolts (88) four Ø8 Arc Washers (76). Tighten bolts with the
Allen Wrench S6 provided.
3. Connect the Hand Pulse Sensor Wires (10) from the rear handlebar with the Flexible Wire(99).
Summary of Contents for ORIOLE EB-OW-ORIOLEX
Page 4: ...4 PARTS LIST...
Page 5: ...5 PARTS LIST...
Page 6: ...6 EXPLODED DIAGRAM...
Page 17: ...17...
