Fit4Home ORIOLE EB-OW-ORIOLEX, User Manual

Page: 10 / 17

10
ASSEMBLY INSTRUCTIONS
STEP 5
1. Remove three Φ8xΦ16x1.5 Flat Washers (67) and three M8 Hexagon Nuts (68) from
underside of the Seat Cushion (17). Guide bolts on underside of the Seat Cushion (17)
through holes on top of the Seat Post (5), attach with three removed Φ8xΦ16x1.5 Flat
Washers (67) and three M8 Hexagon Nuts (68). Tighten nylon nuts with Spanner with Phillips
Screwdriver provided.
2. Insert the Seat Post (5) into the Seat Post Plastic Bushing on the tube of the Main Frame (1)
and then attach the M162 Seat Height Adjustment Knob (23) onto the tube of the Main Frame
(1) by turning it in a clockwise direction to lock the Seat Post (5) in the suitable position.
3. Adjusting the Seat Height
4. Turn the M12 Seat Height Adjustment Knob (23) in a counterclockwise direction to release
the Seat Post (5) and then slide the Seat Post (5) up or down slightly to the desired hole
for the suitable position. Lock the Seat Post (5) in place by tightening the M12 Seat Height
Adjustment Knob (23) in a clockwise direction.
5. NOTE: When adjusting the height of seat post, make sure the seat post plastic bushing does
not exceed the mark line on the seat post.