9
ASSEMBLY INSTRUCTIONS
STEP 2 : Front Post Installation
1. Remove the pre-assembled six M8x15 Hexagon Bolts (39), six Ф8 Spring Washers (54), four
Ф8xФ20x1.5 Flat Washers (55) and four Ф8xФ20x1.5 Curve Washers (50) from the tube of
Main Frame (1) with Allen Wrench provided.
2. Connect Sensor Wire (32) and Extension Sensor Wire (33) together.
IMPORTANT: Turn the Tension Control Knob (28) to the Level 8.
3. Insert bottom of Tension Control Knob (28) into the cable lock of Tension Cable (27). Then pull
Tension Control Knob (28) upward and slide it into the slot of metal bracket of Tension Cable
(27). Then, lower Tension Control Knob (28) so that is sits on the metal bracket of Tension
Cable (27).
4. After properly connecting the tension cable assembly, attach Front Post (3) to the tube
of Main Frame (1) with six M8x15 Hexagon Bolts (39), six Ф8 Spring Washers (54), four
Ф8xФ20x1.5 Flat Washers (55) and four Ф8xФ20x1.5 Curve Washers (50) that were removed.
NOTE:Do not tighten the Hexagon Bolts (39), Spring Washers (54), Flat Washers (55) and Curve