10
ASSEMBLY INSTRUCTIONS
STEP 3 : Left & Right Handrails,Connection Assembly for Left & Right Foot
Bar and Left & Right Foot Bars Installation
1. Remove pre-assembled two M10x20 Hexagon Bolts (48), two Ф10 Spring Washers (47), two
Ф10xФ25x2.0 Big Washers (46) and two D-shaped Washers (45) from the Rotation Rod.
2. Slide Left Handrails & Connection Assembly for Left Foot Bar (5)(7),Right Handrails &
Connection Assembly for Right Foot Bar (6)(8) onto Rotation Rod with two M10x20 Hexagon
Bolts (48), two Ф10 Spring Washers (47), two Ф10xФ25x2.0 Big Washers (46) and two
D-shaped Washers (45) that were removed. Tighten and secure with two S6 Allen Wrenches.
3. Remove pre-assembled two Ф16xФ26x0.3 Wave Washers (43), two Connecting Plates for
Foot Pedal (81), four Ф8xФ20x1.5 Flat Washers (55), two Φ8xΦ16x1.5 Flat Washers (82), and
six M8x15 Hexagon Bolts (62) from Connection Assembly for Left & Right Foot Bars (7)(8).
4. Attach two Ф16xФ26x0.3 Wave Washers (43) onto Connection Assembly for Left & Right
Foot Bars (7)(8). Then, slide Left & Right Foot Bars (9)(10) on Connection Assembly for Left &
Right Foot Bars (7)(8).
5. Attach Connecting Plates for Foot Pedal (81) to Connection Assembly for Left & Right Foot
Bars (7)(8) with four Ф8xФ20x1.5 Flat Washers (55), two Φ8xΦ16x1.5 Flat Washers (82), and
six M8x15 Hexagon Bolts (62) that were removed. Tighten and secure with S6 Allen Wrench
provided.
6. Remove pre-assembled two 1/2”xδ2.0 Spring Washers (65), two 1/2” Left & Right Nylon Nuts
(66)(67) from two Left & Right Hexagon Bolts (63)(64).
7. Attach Left & Right Foot Bars (9)(10) to Left & Right Cranks (25)(26) with two Left & Right
Hexagon Bolts (63)(64), two Ф16xФ26x0.3 Wave Washers (43), two 1/2”xδ2.0 Spring Washers
8. (65) and two 1/2” Left & Right Nylon Nuts (66)(67). Tighten and secure with S8 Allen Wrench
and Spanner provided.
IMPORTANT: Turn the Left Hexagon Bolt (63) COUNTER-CLOCKWISE as tightly as you can.
Secure by tightening Left Nylon Nut (66) CLOCKWISE.
9. Turn the Right Hexagon Bolt (64) CLOCKWISE as tightly as you can. Secure by tightening
Right Nylon Nut (67) COUNTER-CLOCKWISE.
10. Make sure the movable wheels on Left & Right Foot Bars (9)(10) are in the middle of the sliding
rails on Rear Support Frame. Then, secure and tighten Hexagon Bolts (39), Spring Washers
(54), Flat Washers (55) and Curve Washers (50) on Front Post (3) with S6 Allen Wrench.