13
ASSEMBLY INSTRUCTIONS
STEP 5 : Fixed Handlebar and Computer Installation
1. Remove pre-assembled two M5x10 Cross Pan Head Bolts (34) from Computer (31) and two
M8x15 Hexagon Bolts (39) and two Ф8xФ16x1.5 Curve Washers (40) from Front Post (3).
2. Insert the Wires for Hand Pulse Sensor (35) into Front Post (3) and then pull them out from the
top end of Front Post (3).
3. Attach the Fixed Handlebar (4) onto the plate of Front Post (3) with two M8x15 Hexagon Bolts
4. (39) and two Ф8xФ16x1.5 Curve Washers (40) that were removed. Tighten and secure with S6
Allen Wrench.
5. Connect Extension Sensor Wire (33) and Hand Pulse Sensor with Wires (35) to the wires that
6. come from Computer (31). Tuck wires into Front Post (3). Attach Computer (31) onto the top
of Front Post (3) with two M5x10 Cross Pan Head Bolts (34) that were removed. Tighten and
secure with Spanner with Phillips Screwdriver.